Backwashing
-
- Resident
- Posts: 336
- Joined: Tue Feb 28, 2006 5:40 pm
Backwashing
Should bottom drain and skimmers be open when backwashing?
-
- Andalucia Guru
- Posts: 11081
- Joined: Tue Jun 15, 2004 11:11 pm
- Location: Guadalhorce Valley
-
- Andalucia Guru
- Posts: 11081
- Joined: Tue Jun 15, 2004 11:11 pm
- Location: Guadalhorce Valley
When you are backwashing the bottom drain valve (sumidero) and skimmer valves should be open as well as the valve on the waste pipe if you have one. The hoover point valve can be open or closed, it doesn't matter, but don't leave it open when the pool is normal circulation because it could drag long hair into it.
The positions for rinse are the same. Don't try to turn the multiport valve (the one with six positions) when the motor is running.
I have posted this link before but here it is again. Although US based it gives good information:
http://www.de-fontenay.com/poolhmpg.htm
The positions for rinse are the same. Don't try to turn the multiport valve (the one with six positions) when the motor is running.
I have posted this link before but here it is again. Although US based it gives good information:
http://www.de-fontenay.com/poolhmpg.htm
Who is online
Users browsing this forum: No registered users and 44 guests