Anyone know where I can buy grey 125mm waste pipe?
I tried Aki bit they only have grey 110 as the largest size.
125mm waste pipe?
-
- Andalucia.com Amigo
- Posts: 183
- Joined: Thu Sep 17, 2015 10:23 am
Re: 125mm waste pipe?
I think you need an adapter like this:
Flexseal 110mm to 125mm Rubber Flexible Drainage Drain Pipe Coupling
The company is in the UK
https://www.drainagesuperstore.co.uk/pr ... pling.html
Flexseal 110mm to 125mm Rubber Flexible Drainage Drain Pipe Coupling
The company is in the UK
https://www.drainagesuperstore.co.uk/pr ... pling.html
-
- Andalucia.com Amigo
- Posts: 183
- Joined: Thu Sep 17, 2015 10:23 am
Re: 125mm waste pipe?
This one from another company
http://www.toolstation.com/shop/Roofing ... PVC/p54240
Flexible Adaptor Clay to PVC 121-136mm to 100-115mm
http://www.toolstation.com/shop/Roofing ... PVC/p54240
Flexible Adaptor Clay to PVC 121-136mm to 100-115mm
-
- Resident
- Posts: 1356
- Joined: Thu Jan 23, 2014 11:52 am
- Location: Sayalonga
Re: 125mm waste pipe?
Google the plumbing company called Proinco (lots of huge branches), including Granada and coast.
Chris
Re: 125mm waste pipe?
Guess no online store but do they sell pipe and fittings also?
Instead of adapters I could use actual 125mm parts.
Instead of adapters I could use actual 125mm parts.
Re: 125mm waste pipe?
Have you tried Leroy Merlin?
-
- Andalucia.com Amigo
- Posts: 183
- Joined: Thu Sep 17, 2015 10:23 am
Re: 125mm waste pipe?
Is this 125 mm is the internal dia of the plastic pipe? It's possible that you may have measured the 110 mm connector OD as I think 125 mm diameter is generally refered to the clay soil pipe.
Re: 125mm waste pipe?
That's what I can't figure out. I measured the outside but the pipe actually has 125 written on it even though the 2 is a bit obscured.
It is too wide to fit into a 110 accessory like a bend or coupler.
It is too wide to fit into a 110 accessory like a bend or coupler.
-
- Resident
- Posts: 1356
- Joined: Thu Jan 23, 2014 11:52 am
- Location: Sayalonga
Re: 125mm waste pipe?
Pipes are always measured OD (outside diameter).
Fittings are always measured ID (their inside diameter).
Fittings are always measured ID (their inside diameter).
Chris
Re: 125mm waste pipe?
When you see 110 on a pipe, that's the inside diameter usually ID, no?
Regardless, this pipe is measuring around 125 so it'd be unlikely the od is 125 and the ID 110
Regardless, this pipe is measuring around 125 so it'd be unlikely the od is 125 and the ID 110
Re: 125mm waste pipe?
No it is the outside diameter.Dr1Gonzo wrote:[
When you see 110 on a pipe, that's the inside diameter usually ID, no?
Pipes are always sized by their outside diameter.
Pipes are obtainable with different wall thicknesses according to the pressure they need to with stand.
If they were sized by their internal diameter different sized fittings would be needed according to the wall thickness.
Cheers
Gerry
Gerry Harris
Who is online
Users browsing this forum: No registered users and 100 guests