Problem with Technomate stb
Problem with Technomate stb
New to the forum so Hi to everyone - also relatively inexperienced with satellite systems so hope someone can help me.
I had my system installed about 12 months ago (1.2M/80cm dishes and a Technomate-F3/5 set top box) and everything worked perfectly until the other day when the stb froze and I had to do a factory reset. I re-scanned the satellites and have restored all of the PPV channels like Sky etc mainly from the Astra2 satellite but cannot seem to find Freesat channels, BBC1, BBC2, ITV etc. I did some research and tried doing blind and advanced scans on the Intelsat 907 bird using frequency 11495 (V) and I still can't get the stb to find them (I do get 600+ other channels ok though. I also tried inputting the channel info manually but I get a 'no signal' box appear.
Hope someone can help as I am now pulling what little hair I have left out
Cheers
Chris
I had my system installed about 12 months ago (1.2M/80cm dishes and a Technomate-F3/5 set top box) and everything worked perfectly until the other day when the stb froze and I had to do a factory reset. I re-scanned the satellites and have restored all of the PPV channels like Sky etc mainly from the Astra2 satellite but cannot seem to find Freesat channels, BBC1, BBC2, ITV etc. I did some research and tried doing blind and advanced scans on the Intelsat 907 bird using frequency 11495 (V) and I still can't get the stb to find them (I do get 600+ other channels ok though. I also tried inputting the channel info manually but I get a 'no signal' box appear.
Hope someone can help as I am now pulling what little hair I have left out
Cheers
Chris
- GerryinCajiz
- Resident
- Posts: 286
- Joined: Sun Feb 23, 2014 8:45 pm
- Location: Lancashire
Re: Problem with Technomate stb
Welcome to the forum. It would probably help the experts if they knew which Triana you were located in.kipperdog wrote:New to the forum so Hi to everyone -
Hope someone can help as I am now pulling what little hair I have left out
Cheers
Chris
Gerry
Re: Problem with Technomate stb
I live about 3 km from Triana near Velez Malaga
Chris
Chris
Re: Problem with Technomate stb
Hi
Welcome to the forum.
I'm a bit confused. Do you have a motorised dish or two dishes?
The reason I'm confused is that the Astra2 satellite and the Intelsat 907 satellite are in different locations, approximately 90 deg between them.
Cheers
Gerry
Welcome to the forum.
I'm a bit confused. Do you have a motorised dish or two dishes?
The reason I'm confused is that the Astra2 satellite and the Intelsat 907 satellite are in different locations, approximately 90 deg between them.
Cheers
Gerry
Gerry Harris
Re: Problem with Technomate stb
Hi Gerry, thanks for the reply.
I have two non-motorised dishes (a 1.2m and a 80cm) presumably to get the sky channels on one and freesat on the other?
Chris
I have two non-motorised dishes (a 1.2m and a 80cm) presumably to get the sky channels on one and freesat on the other?
Chris
-
- Resident
- Posts: 458
- Joined: Tue Nov 26, 2013 7:00 pm
- Location: Casares
Re: Problem with Technomate stb
Sometimes if you inadvertently knock off the "BBC" software it needs a quick flash with the appropriate software. Same thing happened to my GI 2233HD and the dealer I bought it from in Estepona simply re-flashed it from a USB stick for me.
Re: Problem with Technomate stb
Hi Chris
I should have read your post properly, you do say "1.2M/80cm dishes "
The 1.2m is for Astra2 the 80Cm one for Intelsat 907.
Back to your question, I had once had the same problem of not being able to find BBC1 etc.
I tried variuos ways of scanning and , I think, on one of the screens I pressed F1 to set the feed channel scan off and then it found the BBC1 etc channels.
Sorry I can't remember exactly what I did I know it took me a while to get the correct combinations of options.
Cheers
Gerry
I should have read your post properly, you do say "1.2M/80cm dishes "
The 1.2m is for Astra2 the 80Cm one for Intelsat 907.
Back to your question, I had once had the same problem of not being able to find BBC1 etc.
I tried variuos ways of scanning and , I think, on one of the screens I pressed F1 to set the feed channel scan off and then it found the BBC1 etc channels.
Sorry I can't remember exactly what I did I know it took me a while to get the correct combinations of options.
Cheers
Gerry
Gerry Harris
-
- Andalucia Guru
- Posts: 11081
- Joined: Tue Jun 15, 2004 11:11 pm
- Location: Guadalhorce Valley
Re: Problem with Technomate stb
I think those of us on this forum who have a Technomate have a TM5402 but I assume your F3/5 works in roughly the same way. I am trying to remember if a factory reset takes out the Phantompatch. You may need to reinstall it.
Have a read through this section of the Technomate Satellite Discussion forum. Someone there may be able to help you and it also has links to the Phantompatch:
http://www.technomate-community-forum.c ... -5-hd.131/
If you do need to reinstall the Phantompatch you can download the latest one (1/11/2016) from here:
http://downloadtmsw.com/bbs/list.php?board=tmf35hd
My 5402 has frozen on a couple of occasions but I have found that just switching it off with the power switch at the back then switching it back on solves the problem. The only thing I have to reset is the time and date.
I would suggest that, once you are up and running again, you back up the working O/S onto a pen drive along with the channel set up then, if you need to carry out a factory reset, you can just reinstall both.
Have a read through this section of the Technomate Satellite Discussion forum. Someone there may be able to help you and it also has links to the Phantompatch:
http://www.technomate-community-forum.c ... -5-hd.131/
If you do need to reinstall the Phantompatch you can download the latest one (1/11/2016) from here:
http://downloadtmsw.com/bbs/list.php?board=tmf35hd
My 5402 has frozen on a couple of occasions but I have found that just switching it off with the power switch at the back then switching it back on solves the problem. The only thing I have to reset is the time and date.
I would suggest that, once you are up and running again, you back up the working O/S onto a pen drive along with the channel set up then, if you need to carry out a factory reset, you can just reinstall both.
Let's go Brandon!
Re: Problem with Technomate stb
Thanks for the replies
Tried flashing the latest patch but still no joy. Someone mentioned on Facebook that the STB needs to be registered to receive freesat channels, has anyone heard of this?
Tried flashing the latest patch but still no joy. Someone mentioned on Facebook that the STB needs to be registered to receive freesat channels, has anyone heard of this?
-
- Andalucia Guru
- Posts: 11081
- Joined: Tue Jun 15, 2004 11:11 pm
- Location: Guadalhorce Valley
Re: Problem with Technomate stb
Not sure what you mean by 'Freesat'. I just use mine for ITV, BBC etc from Intelsat 907. I didn't have to register the box with anyone.
Let's go Brandon!
Re: Problem with Technomate stb
Yes that's what I meant by freesat, BBC1 et al. I have finally been able to contact the installers who said they will fix the problem if I take the stb to them. I will report back on what they do. It seems the moral is, don't do a factory reset
Re: Problem with Technomate stb
Thanks for all of your help with this problem. Got it sorted this week, I took it to the installers who said some software was removed by the factory reset. they wouldn't say what the software was but reloaded it from a USB stick. When I plugged the box in, all of the missing channels were there without the need to scan the sats. I am thinking they may have had a backup so I will be following the advice you posted
-
- Resident
- Posts: 458
- Joined: Tue Nov 26, 2013 7:00 pm
- Location: Casares
Re: Problem with Technomate stb
Exactly what happened to me as I said. When I lost my channels earlier this year it was because I had been "having a fiddle" and stupidly lost all the channels. My supplier told me there was no way that I could restore them myself and they flashed them back from a usb adding channel 5 at the same time.
-
- Andalucia Guru
- Posts: 11081
- Joined: Tue Jun 15, 2004 11:11 pm
- Location: Guadalhorce Valley
Re: Problem with Technomate stb
I think the installers like to maintain an aura of mystery around the reception of Intelsat 907.
I repositioned my dish, bought my Technomate from Amazon, installed the Phantompatch and scanned for the BISS encrypted channels without any input whatsoever from a ladder monkey. The only outlay was that of the receiver.
I repositioned my dish, bought my Technomate from Amazon, installed the Phantompatch and scanned for the BISS encrypted channels without any input whatsoever from a ladder monkey. The only outlay was that of the receiver.
Let's go Brandon!
Re: Problem with Technomate stb
No it's a case of they want to screw Joe public for more money at any and every opportunity.Beachcomber wrote:I think the installers like to maintain an aura of mystery around the reception of Intelsat 907.
Cheers
Gerry
Gerry Harris
-
- Andalucia Guru
- Posts: 11081
- Joined: Tue Jun 15, 2004 11:11 pm
- Location: Guadalhorce Valley
-
- Resident
- Posts: 458
- Joined: Tue Nov 26, 2013 7:00 pm
- Location: Casares
Re: Problem with Technomate stb
Well I have to say there has been no extra outlay for me apart from the original install which including the box and realignment was 175 euros all in which I felt was reasonable? My problem with the reprogramming was handled free of charge by my local supplier.
Re: Problem with Technomate stb
You were lucky with your supplier, he is obviously one of the good guys.
Regrettably they aren't all like that.
I am aware of some suppliers who charge about €40 to update the BISS codes.
Cheers
Gerry
Regrettably they aren't all like that.
I am aware of some suppliers who charge about €40 to update the BISS codes.
Cheers
Gerry
Gerry Harris
-
- Resident
- Posts: 458
- Joined: Tue Nov 26, 2013 7:00 pm
- Location: Casares
Re: Problem with Technomate stb
Nope it's been a while since they changed as you know but he always supplied his clients with the codes f.o.c. when needed and indeed would input them for his technophobic clients if they took the box to his shop again f.o.c.
Then again he gets a lot of business by good reputation here.
Then again he gets a lot of business by good reputation here.
-
- Andalucia.com Amigo
- Posts: 183
- Joined: Thu Sep 17, 2015 10:23 am
Re: Problem with Technomate stb
Sound likes "Money for nothing" couple of minutes to flash the patchgerryh wrote:You were lucky with your supplier, he is obviously one of the good guys.
Regrettably they aren't all like that.
I am aware of some suppliers who charge about €40 to update the BISS codes.
Cheers
Gerry
Like Beachcomber I bought the Technomate 5402 M3 from amazon, downloaded the patch from Technomate community and re-pointing the dish with dishpointer.com! Easy as pie
Who is online
Users browsing this forum: Majestic-12 [Bot] and 33 guests