I have one of these, The speaker wires to one side was never correct and in the past when i put volume too high it stops and "power protect" comes on.
All i ever need do was turn off lower volume and all ok.
I disconnected all the cables, left it off over night, i also pressed enter/stop/standby all at once which brings up cold reset but changes nothing.
When now off it will be in "sony demo" mode, when i turn on it will be normal for about 3 secs and can be switched from cd/radio/volume etc.
After the 3 secs it will flash between protect and push power.
I would welcome any ideas.
Many thanks
sony mini cd power protect
- Enrique
- Andalucia Guru
- Posts: 9490
- Joined: Tue Mar 24, 2009 9:47 am
- Location: Mytchett/Alcala La Real
Re: sony mini cd power protect
H wollie,
You might get some ideas if you Google the model number.........Example
https://forums.anandtech.com/threads/so ... e.2067491/
or
e.g...........
sony mini cd player After the 3 secs it will flash between protected and push power
You might get some ideas if you Google the model number.........Example
https://forums.anandtech.com/threads/so ... e.2067491/
or
e.g...........
sony mini cd player After the 3 secs it will flash between protected and push power
All my best learning experiences start with a problem I need to solve.
Who is online
Users browsing this forum: No registered users and 76 guests